WTB TPS screws and washers
 

I would like to buy a screw and the two crescent shaped washers that attach the throttle position sensor to the LT5.
Please help!!!!

Re: WTB TPS screws and washers
 

http://www.whiteracingproducts.com/i...roducts_id=301

I have the full throttle body screw rebuild kit in stock.

Re: WTB TPS screws and washers
 

can you not match these in the machine screw drawers at home depot or lowes? How about fastenal?

Re: WTB TPS screws and washers
 

Yes found a screw with the same thread but the head does not match... The washers are crescent shaped so they can not be found!

Re: WTB TPS screws and washers
 

Can you get this from GM?
17112266
GM MRSP is $52.84, GM parts direct $29.06.

peace
Hog

Re: WTB TPS screws and washers
 

I tried my local GM dealership and GM parts direct and no luck. If you know of something please send a link!
Thanks!!!

Re: WTB TPS screws and washers
 

This is a really odd-duck screw. I could find someting close that would screw in, but the diameter was really too small and the thread pitch was off. it didn't conform to SAE or Metric.

I have a couple in stock.

http://jerrysgaskets.com/store2/root...roducts_id=164

http://jerrysgaskets.com/store2/root...7110007-UA.jpg

Re: WTB TPS screws and washers
 

Jerry

Pitch seem to be around 0,7-0,8. A M5x0,8 or a fine threaded M6x0,75 looks to be close from that pic.

Re: WTB TPS screws and washers
 

That's the problem with this particular screw, it's around/about & close, but nothing standard for metric or SAE actually matches the pitch & diameter.

Re: WTB TPS screws and washers
 

SOLD!
Thanks Jerry, I thought that I had checked your site before, must have missed it!