Short shifter
 

Where do I get what I need to convert to a short shifter in my 91 ZR-1? Does it get harder to shift due to the shorter leverage?
Attachment 8055

Sent from my SM-G955F using ZR-1 Net Registry mobile app

Re: Short shifter
 

The Hurst unit is available here on the registry in the vendor section. It’s a nice piece. Shift effort is very reasonable, you won’t notice much of an increase. The factory shifter has pretty long throws, you have to bend the elbow quite a bit when pulling it back. I find the Hurst to be “just right” not too short, reasonable effort. The ZF Doc shifter is supposed to be very nice too.

Re: Short shifter
 

Can't find the vendor section...got a link?

Sent from my SM-G955F using ZR-1 Net Registry mobile app

Re: Short shifter
 

Try this:

http://www.zr1netregistry.com/Market...s-Shifter.aspx

Re: Short shifter
 

Thanks [emoji106]

Sent from my SM-G955F using ZR-1 Net Registry mobile app

Re: Short shifter
 

I've got the Hurst, short throw, short shaft. Love the feel of it. It's notchy, click, click.

Re: Short shifter
 

Same here. One of the best mods I've done. It is a very solid, satisfying feeling.

Re: Short shifter
 

Does it have the lift-up ring for reverse too, or do you risk hitting reverse when shifting into 6th..? I know ZF Doc has that covered on their short throw shifter.

Sent from my SM-G955F using ZR-1 Net Registry mobile app

Re: Short shifter
 

Mine does not have the reverse lock out.
The ZF Doc says we can all miss that shift once, but it will be expensive.
I figure 6th is kinda hard to miss, you never speed shift to 6th.
If there is any doubt in my mind, before I release the clutch, I'll check to make sure.

Re: Short shifter
 

With 4:10 gears we use 6th pretty often, so I think I must go for ZF Doc's $250 option which uses the original reverse lock out.

Sent from my SM-G955F using ZR-1 Net Registry mobile app