ZR-1 Net Registry Forums

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)
-   C4 ZR-1 Prototypes (http://zr1.net/forum/forumdisplay.php?f=47)
-   -   88 ZR1 EX5023 Thread (http://zr1.net/forum/showthread.php?t=13102)

Blue Flame Restorations 10-17-2010 02:54 PM

88 King Of The Hill ZR1 EX5023 Thread
 
Went through all of the boxes of parts that Geoff kept when he dis-assembled the car. Some nice surprises! A nice set of 88 dated wheels plus two extra 89 ZR1 wheels.

http://i55.tinypic.com/2ue4egx.jpg
http://i51.tinypic.com/2pqth0j.jpg
http://i56.tinypic.com/28aqnpz.jpg
Console tray insert with KOH (King of the Hill) written on it
http://i54.tinypic.com/juk8bk.jpg
http://i51.tinypic.com/2lntm6t.jpg

-=Jeff=- 10-17-2010 05:08 PM

Re: 88 ZR1 EX5023 Thread
 
Sweet project

Blue Flame Restorations 10-17-2010 05:31 PM

Re: 88 ZR1 EX5023 Thread
 
Prototype tank (Like Tyler's EX5014) dated 7-8-87
http://i56.tinypic.com/29ekayr.jpg
http://i52.tinypic.com/j7umuo.jpg
Speedo/tach bezel with hand cut rectangular hole on the far left corner facing from the front.
http://i53.tinypic.com/2ltj31u.jpg\
This roughly cut hole was for some wiring during a project, according to Geoff.
http://i53.tinypic.com/2r5timo.jpg
This original plate will go back onto the car when finished.
http://i56.tinypic.com/ok0psp.jpg

Kevin 10-17-2010 05:56 PM

Re: 88 ZR1 EX5023 Thread
 
this is awesome

Tyler Townsley 10-17-2010 07:50 PM

Re: 88 ZR1 EX5023 Thread
 
[QUOTE}This roughly cut hole was for some wiring during a project, according to Geoff.
http://i53.tinypic.com/2r5timo.jpg
QUOTE]

Hole was for this. The item in rear is an ecm with spaces for 5 different calibration chips selectable by dip switches. The other item was velcroed to the dash and was used to read various engine data. There was wireing that was used to remote the ecm to the hatch area through that hole. The picture was taken at Geoffs shop in 98? He used the items to do the calibration to meet emission control levels when he worked for Lotus.

http://deliquescence.net/~tyler/prot...gEquipment.jpg

Wonder where that equipment is. LOL

Tyler

Corvettes White 10-17-2010 11:52 PM

Re: 88 ZR1 EX5023 Thread
 
Very Nice. Is the 8000 rpm lens cracked? George

Blue Flame Restorations 10-18-2010 02:17 AM

Re: 88 ZR1 EX5023 Thread
 
Quote:

Originally Posted by Corvettes White (Post 99995)
Very Nice. Is the 8000 rpm lens cracked? George

Yes, but I may use it just the way it is unless I can get one silk screened.

Blue Flame Restorations 10-18-2010 12:21 PM

Re: 88 ZR1 EX5023 Thread
 
Got the estimate going for the roll over hoop and windshield frame today. Not going to waste any time on this part of the project.

1989ZR1#74 10-20-2010 06:29 PM

Re: 88 ZR1 EX5023 Thread
 
Brett, Looks like fun...

Blue Flame Restorations 11-18-2010 04:45 PM

Re: 88 ZR1 EX5023 Thread
 
It was Xmas in Nov today. Picked up these two NOS pieces for the rebuild, plus three empty birdcages that were used by General Tire, Marion, IN for panel fitment. GT made panels for GM. The three birdcage/frames have never been stamped with a vin. Great race car parts. One birdcage/frame will be canilbalized at the frame shop so EX5023 can be made whole again. Roll over hoop and windshield frame parts.

What were the odds of coming across an NOS ZR1 rear upper surround panel and luggage tub???
http://i52.tinypic.com/1059x4z.jpg


All times are GMT -4. The time now is 11:18 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020