flow numbers for ported heads
 

Hey guys, thought I would post the flow sheet for the ported heads that I bought recently. These came with a low mile 368 that I bought recently to replace my original engine. These were done in the early 2000s for a stock displacement setup so they're probably pretty mild compared to what people have been doing since then

Re: flow numbers for ported heads
 

Greg is extremely meticulous and among the best! FYI, Greg worked at Mercury in Stillwater, Ok , when the LT5 project started. Like all the others, Greg gave up his then current position voluntarily to be part of the LT5 Team. He is still doing port work on LT5's. I'm proud to be sporting Greg's work on my 415 LT5!

Re: flow numbers for ported heads
 

If somebody has flow numbers from today's ported heads please post them.

I would like to compare what was ported in the late 90's/early 2000's versus today.

Thank you,

Re: flow numbers for ported heads
 

Here is link to some flow numbers I posted a while back.

http://www.zr1.net/forum/showpost.ph...7&postcount=24

Re: flow numbers for ported heads
 

I have stock flow numbers somewhere if i find them i will post them.

Pete