Spoiler and Diffuser
 

Does anyone have thoughts on where the spoiler and diffuser in the attached might have originated - regular aftermarket or custom piece? I know it would be too narrow for a ZR-1 as it sits on this regular C4.

Thanks


http://i154.photobucket.com/albums/s...d-w-diff-2.jpg

Spoilers and Diffusers - 2
 

This one caught my attn. too - not sure if I would fit either to my Zee, but they are more subtle than most other units I've seen for C4s.




http://tse1.mm.bing.net/th?&id=OIP.M...9&rs=0&p=0&r=0

Re: Spoiler and Diffuser
 

"Does anyone have thoughts on where the spoiler and diffuser in the attached might have originated - regular aftermarket or custom piece? I know it would be too narrow for a ZR-1 as it sits on this regular C4."


The spoiler and rear diffuser in the picture are renderings and not actual products.

http://i154.photobucket.com/albums/s...ockup-gray.jpg


http://i154.photobucket.com/albums/s...nd-diffuse.jpg


If you're going to put a rear spoiler on your car, this is one of the better looking ones.

The original link is here if you want more info:
http://www.corvetteforum.com/forums/...-opinions.html

Re: Spoiler and Diffuser
 

Noted - thanks. Not sure if the copper Vette photo is a rendering. Many of the comments in the thread you provided capture my thoughts re how bulky and overdone the C4 aftermarket body pieces are. I like the more subtle spoiler approaches like the C6ZR1, M3, etc. which tend to give that little extra that the otherwise beautiful C4 tail lacks. I will continue my search.

Re: Spoiler and Diffuser
 

The spoiler on the copper colored Vette is real.
It's made by a company called CHD Tuning in Italy.
Here's their website:
http://www.chdtuning.com/?page_id=2103&lang=en
Perhaps they could make a wider version for ZR-1s.

http://www.chdtuning.com/wp-content/...ette_c4_01.jpg

http://www.chdtuning.com/wp-content/...ette_c4_04.jpg

Re: Spoiler and Diffuser
 

Appreciate that. I am following up with the Italian supplier.

Thanks

Re: Spoiler and Diffuser
 

American Hydrocarbon in Florida duplicated both of those for 91-up..
(With permission from the European company

Re: Spoiler and Diffuser
 

i like the wheels on the blue car!

Re: Spoiler and Diffuser
 

For wider ZR-1's, too?

It looks pretty good on the early Vettes. It would be interesting to see what they look like on a later rounded rear (especially in ZR-1 width).

Re: Spoiler and Diffuser
 

Check out the spoiler Corvette Forum member (GS977) made for his Grand Sport. Best one I have seen yet. The only change I would make to it is recess the center section of it.