WANTED: Cam position sensor and Dual mass flywheel for 1990 ZR1 LT5
 

Hello. Looking for a camshaft position sensor for my 1990 ZR1. From what I understand, there are a few part numbers: 10096172 and 10137658. Possibly more???? Please let me know if you have one, new or used. THANKS!

Maybe a dual mass flywheel too!!!!

Please let me know if you have either

Re: WANTED: Cam position sensor for LT5
 

I am looking also. All I have found is 239.95 at napa. Whew! Any leads are appreciated.

Re: WANTED: Cam position sensor and Dual mass flywheel for 1990 ZR1 LT5
 

PM sent...
H
:cheers:

Re: WANTED: Cam position sensor for LT5
 

Mr. Dynamite. Jerrys link submitted is for a crank sensor. Jerry has no listing for cam sensors. Any other suppliers anyone can share?

Re: WANTED: Cam position sensor for LT5
 

Some potential after-market other than the NAPA selection BUT only for the later 10137658 which is also the NAPA interchange.

WELLS - SU1101

SMP - PC110

AIRTEX - 5S1254

AUTOPART INTERNATIONAL - 1802-302169 (couldn't confirm with an image)

When the GM 10137658 was used to replace the 10096172 there were GM notes that mentioned a different shield GM 10199080 likely required.

10096172 seems to have been used '90 & '91 with the 10137658 potentially in later '92+ builds.

If your '90 is apart it might be interesting to compare the shield differences with snapshots.

Re: WANTED: Cam position sensor for LT5
 

I have an AIRTEX in my car,think it was $200. As stated the original shield won’t work with this part.

Re: WANTED: Cam position sensor for LT5
 

Gentlemen, I am desperate to purchase a camshaft positioning sensor. A month ago napa had five within the country, now they have none. I have used all of the part numbers I have called manufacturers I have spent hours on the Internet and I have come up blank. I waited until I got my bonus last Friday and that was too long. My car backfired coughed stumbled and died in traffic Saturday evening. Started right up after I stopped though. Code 31 once again. Desperate in Florida.

Re: WANTED: Cam position sensor for LT5
 

I hesitate to say it but White Racing Products in FL. shows one in stock. $296.00

These guys are a craps shoot

http://www.whiteracingproducts.com/i...roducts_id=596

The next site has a listing of dealers that supposedly have them in stock. Good luck!

http://oemcats.com/oem-parts/10137658.html

H
:icon_sant

Re: WANTED: Cam position sensor for LT5
 

FWIW: Have your injectors been replaced?
Code 31 was just one of the spurious codes that
showed up when my injectors crapped out...

VRe: WANTED: Cam position sensor for LT5
 

Wonder if there is an alternative sensor out there that could be adapted to work in place of the original OEM cam sensor?