FS ZR-1 Splash Front plate
Just to let everyone know that I will not be making any more ZR-1 Splash
front plates. I have in stock (11) ZR-1 Splash plate for the 1990 ZR-1 and (5) ZR-1 Splash plates for the 1991 thru 1995 Each plate cost $85.00 and shipping is included. You can send me a PM for information on how to order. Thank you John 1990 white/black # 2546 one of a few 4l8OE eq ZR=1's |
Re: FS ZR-1 Splash Front plate
Sent ya a PM John :thumbsup:
Jay |
Re: FS ZR-1 Splash Front plate
Hi John,
Do you have any 1995 splash plates left? Thanks in advance Mike P. |
Re: FS ZR-1 Splash Front plate
Hi Mike,
Sorry all sold out.I tried to get premission from GM to sell them,but was denied. Now I was thinking what if I made just a blank front plate for 1984 thru 1990 and 1991 thru 1996 and the custormor made a decal of their own design on the blank front plate. What do you think? John |
Re: FS ZR-1 Splash Front plate
GM can?t stop you from giving them away for free
Side note, I must have gone too fast. Mine caved in a bit and did not hold shape. |
Re: FS ZR-1 Splash Front plate
Sorry your plate caved in , where did it warp? middle ,side. So far yours is the
first I have heard about. I'am going to check with my supplier about the material he used to make them. I'll let you know he tells me. John |
Re: FS ZR-1 Splash Front plate
I was surprised John. It seemed thick enough. I will try to take a picture tomorrow. I wonder if the paint affects that plastic and weakened it or if that was not a factor.
|
Re: FS ZR-1 Splash Front plate
Mikey,
I found my old post on the type of plastic used to make the ZR-1 Splash front plate . Its called EPOXACRYLATE, I do not know if the paint you used effects the material used to make the ZR-1 splash front plate. I have not gotten an answer from the manufacturer of the plates. John |
Re: FS ZR-1 Splash Front plate
3 Attachment(s)
-Z- is about 1/4 inch concave and -1- is about 1/8 inch concave.
Reflection of my level straight edge in the cover plate above the ZR-1 helps illustrate the curvature. Single stage body paint plus spray can of clear from auto zone. |
Re: FS ZR-1 Splash Front plate
Just sent you a PM.
|
All times are GMT -4. The time now is 09:55 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020