90 WTB GM 10135629 LT-5 HEATER INLET OUTLET HOSE
 

Need a new hose, might consider good used. Anyone know if they can be rebuilt if not available? This is the dual metal/rubber coolant line from the heater core and surge tank.

Thanks!
90

Re: 90 WTB GM 10135629 LT-5 HEATER INLET OUTLET HOSE
 

A long shot but I would take it to a hydraulic hose fabricator and see if they can reproduce a similar piece.

Re: 90 WTB GM 10135629 LT-5 HEATER INLET OUTLET HOSE
 

A buddy says he thinks he has a used one, I may get that and send the old for inspection and possible rebuild. Speaking of heater cores, getting the heater box out was a pain...especially the two 7mm screws at the bottom engine side of the heater box, there has to be an easier way to reinstall, I scared or marring my new top end finish ....any help advice for simpler installation?



Sent from my iPhone using ZR-1 Net Registry

Re: 90 WTB GM 10135629 LT-5 HEATER INLET OUTLET HOSE
 

I know this is late reply but I have an NOS set as well as a some othher NOS ZR1 parts:
Radiator hose set
water pump
starter
plug wires
owners kit

Re: 90 WTB GM 10135629 LT-5 HEATER INLET OUTLET HOSE
 

Do you have the heater hose I am looking for ? Also looking for a thermostat housing. PM me or reply. Thanks

Re: 90 WTB GM 10135629 LT-5 HEATER INLET OUTLET HOSE
 

I have part # 10135629 which I think is what you're looking for.

Re: 90 WTB GM 10135629 LT-5 HEATER INLET OUTLET HOSE
 

I am going to PM you.