Quote:
Originally Posted by KJL
I am also curious to know if cams can be changed out with motor in car. That would be the next mod I would consider at this point. I already have porting, headers, exhaust, chip etc...
I also see a Fidanza flywheel is also recommended by many. Is this doable with vehicle on jack stands?
|
while it's technically feasible to time the cams in the car it's not really the best approach and much harder than pulling the motor to do it right
putting a fidanza in the car on jack stands can be done but again NOT really recommended. the ZF 6 speed is a heavy rascal and getting the c beam out can be a hassle without some wiggle room
get a good transmission jack and a lift, it's worth it! I haven't ever done it on jack stands before so I can't comment on how hard it is, but for sure it can be done, just much tougher