ZR-1 Net Registry Forums - View Single Post

Franke · 10-09-2013

Schrade, you have to designate a file to save the data to when starting datamaster. I named my files according to what repairs I just preformed such as new O2 sensors.uni. When I got mine working I didn't have any drop outs at all during the entire run times. I used com port 3. Try changing the ALDL link timing. See if that helps steady link up. Also try transmit and receive timeout to 180 ms instead of default 120.
You could be right about the interference inside the vehicle. At least you've made some progress in getting a data stream to read.

10-09-2013	#18
Franke Join Date: May 2013 Location: Beaver, PA Posts: 516	Re: Where has my DM log data saved to? Schrade, you have to designate a file to save the data to when starting datamaster. I named my files according to what repairs I just preformed such as new O2 sensors.uni. When I got mine working I didn't have any drop outs at all during the entire run times. I used com port 3. Try changing the ALDL link timing. See if that helps steady link up. Also try transmit and receive timeout to 180 ms instead of default 120. You could be right about the interference inside the vehicle. At least you've made some progress in getting a data stream to read.