Quote:
Originally Posted by Kevin
went through and cleaned everything but can't get the code to clear. just not fast enough to do the sequence
|
Jumper A to seat frame and then jumper K to seat frame (much easier to observe screen and touching jumper K to seat frame). It took me several tries and FINALLY.....
Also I did not start the 3 second remove of ground of K to seat frame until the actual code started to appear (after the code 12).
And....I must have tried jumping A to K at the ALDL about 20 times and never got it just right
You know you have a good ground if you see Code 12 appear on screen. If you do not see Code 12.....time to readjust your ground.