Re: The Time is Now......
Tom
You have the right idea about bumping comp. but unless you mill the "215"s ALOT you will not see a point
Use a set of TRW/Speed Pro H693CP with a .230 dome that will give you 10-1 with your 781 heads
Look for a slightly bigger cam in duration around 225-235 degrees of duration on the intake @.050
Do not exceed 240 duration with power brakes !
Definitely bump spring pressure up at least by 20+ lbs
Mill block n heads flat n drive over to Astoria NY n we will assemble engine
Got Fel-Pro gaskets n oil pump waiting for you
Congrats on retirement
|