View Single Post
Old 04-03-2017   #13
5ABI VT
 
Join Date: Jun 2013
Location: Toronto
Posts: 782
Default Re: My fuel pump install Pics !! Fuel filter o2 Sensors DENSO !

Quote:
Originally Posted by karlaw View Post
I changed my fuel pumps last summer after car was started after sitting 5 years.
It started, left it idle for 15 mins, car died. It appeared as empty on gas gauge, so put in some fuel, car would not start, not fire.
Decided to change fuel pumps. I found one pump at auto parts store, and one pump for a older gmc suburban 454 fuel injected, from GM store.
Both pumps seemed to be a close match and cheaper price, so installed them and fuel filter .
Car is NO START, no fire, but has the 50 lbs pressure to top of engine.
Checked spark plugs, they seemed a bit weak for spark, but they all working.
Car will Not Start.
I had a mechanic friend work on the car, bypassed the VATS system using a GM "VATS INTERAGATOR" tool I have, and we run a expensive scan tool, could not find any codes.
I even swapped the ECM out with my other matching LT5, but No Start.
I don't know where to go at this point.
Any HELP out there ?


Sent from my iPhone using ZR-1 Net Registry
is the engine turning over ? or just click and nothing? Assuming you can hear the starter turn and try. Just had to ask my car wouldnt fire at a gas station one random day and it was the clutch switch. I absolutely dont mind posting in this thread at all but creating a new one will get best exposure so everyone can see it and chime in
5ABI VT is offline   Reply With Quote