Got it done without pulling plenum. Pulled TB, which gave me just enough room to get the hose fitting back onto the end of the pipe nipple. Made a wire hook with coat hanger wire and pulled it into the pipe. Put a tie wrap around it and cinched it up.
I'll be changing out the throttle set screw while the TB is out.
When i get the plenum and injector housings I got from Constantine ported, I'll pull the top end down, including the valve covers and get everything powder coated gloss black with red lettering. Going to re-plumb everything under the plenum when I build it back up.[ATTACH][ATTACH]
Sent from my XT1585 using
ZR-1 Net Registry mobile app