ZR-1 Net Registry Forums - View Single Post - Another No-Start Condition

Flyman 27 · 11-27-2019

The problem was intermittent, it would test fine, so I would ignore that area, then proceed. Then I would get other faults that didn't make sense, so I tested everything over. And again, it all tested fine. Then it would fault when I tried to start it.
It was not an easy problem to find because the "fault" kept moving.

I kept testing the circuits, but not the amp draw of the pumps. That is where I failed.

11-27-2019	#6
Flyman 27 Join Date: Apr 2017 Location: Wayne Illinois Posts: 396	Re: Another No-Start Condition The problem was intermittent, it would test fine, so I would ignore that area, then proceed. Then I would get other faults that didn't make sense, so I tested everything over. And again, it all tested fine. Then it would fault when I tried to start it. It was not an easy problem to find because the "fault" kept moving. I kept testing the circuits, but not the amp draw of the pumps. That is where I failed. __________________ 91-#1935 Black/black & gray, Haibeck 500 Cams by Pete