ZR-1 Net Registry Forums - View Single Post

WARP TEN · 10-27-2020

I never had any significant flat spotting with the Michelin tires I put on the '95. Stored on a lift for 5 months Nov 1- Apr 1 with the tire pressures at about 50 psi. When I took it down in the spring a short drive and the tires were perfectly normal. At one point I did have a valve develop a slow leak but Costco (where I bought the tires) replaced it without charge. They also said the valves were only warranted by the manufacturer up to 44 psi. I now put the pressures (on the Z06) to about 45 psi during storage. --Bob

10-27-2020	#16
WARP TEN Join Date: Apr 2007 Location: Lake Bluff, IL Posts: 2,042	Re: Tire Replacement Suggestions I never had any significant flat spotting with the Michelin tires I put on the '95. Stored on a lift for 5 months Nov 1- Apr 1 with the tire pressures at about 50 psi. When I took it down in the spring a short drive and the tires were perfectly normal. At one point I did have a valve develop a slow leak but Costco (where I bought the tires) replaced it without charge. They also said the valves were only warranted by the manufacturer up to 44 psi. I now put the pressures (on the Z06) to about 45 psi during storage. --Bob __________________ 2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough"