Quote:
Originally Posted by KJL
Yes but..... it?s not like I can just run to NAPA and replace it. It still works. The leak was minor. The oil pan gasket leaks much more. It seems a little super glue in the crack with a skim of high temp silicone would be worth a try. Epoxy may be an overkill and more risky. My guess the sensor itself is bedded in epoxy internally and should be fine even with a crack in the outer shell. The crack is barely visible.
|
I agree with you to attempt a repair. I didn?t see the crack you have, but I repaired the one on my 90 with very minimal JB Weld and it was fine.
Sent from my iPhone using
ZR-1 Net Registry
__________________
Craig
"ZR-1 NO KA 'OI"
"ZR-1 ICHIBAN"
1995 #228 Black/Black with Dunn Heads
ZR-1 owner since September 2003
ZR-1 Net Registry Founding Member #0074
NCM Lifetime Member #2048
