porting injector housings to 36MM
Who?s doing the heads and what size valves?
What rpm do you expect peak power?
Last time I measured the injector housings, they were about 4" long centerline (101.6mm). From that you can work out either diameter or volume, if the other is known.
__________________
Todd
____________________________________
*** our email address has changed!
info@pepmeierengines.com
pepmeierengines.com
Friend us on Facebook too: www.facebook.com/profile.php?id=100011443683384
Pepmeier Engine Development
Last edited by tpepmeie; 03-15-2021 at 08:27 PM.
|