Re: C7 ZR1 Registry members
Quote:
Originally Posted by mpiecyk
I like that emblem on the back Bob, very sophisticated.
|
Thanks, but not really very sophisticated. I just bought a Z06/Supercharged side vent emblem from my local dealer (about $25 as I recall). Then I dry-experimented with whether I wanted the full emblem or just the Z06. Decided that the more ZR-1-like Z06 was the best so I carefully cut the Supercharged off with a fine tooth hacksaw. Discovered that the "Z06" was in two pieces and held together by the Supercharged part, so I had to align it carefully as I applied it with the sticky tape on the back. But I am happy with the way it came out. Of course no one really notices it unless I point it out. --Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z"
1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts
--Sold but still running strong
1993 Quasar Blue #161 "HIL KING"
--Sold but still running strong, now with more than 120,000 miles
1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd
--Sold a long time ago
ZR-1 Net Registry Founding Member #95
NCM Lifetime Member
Favorite Quote--Attributed to Mickey Thompson:
"Too Much Horsepower is Almost Enough"
Last edited by WARP TEN; 04-24-2021 at 10:40 AM.
|