ZR-1 Net Registry Forums - View Single Post

Black Red '90 · 05-25-2021

Fronts are same as stock. The rears are +41.

I made a cardboard template that matched the profile of the sidewall and the flange of the wheel. The closet item was the brake line. The template had to be trimmed to 0.9" to clear. The +41 offset on the 11.5" puts near all of the extra 0.5" towards the inside. A +40 or +39 would have bought a little more clearance, but I didn't want the wheels to "poke" out.

05-25-2021	#12
Black Red '90 Join Date: May 2018 Location: Virginia Posts: 79	Re: BC Forged Wheels Purchased Fronts are same as stock. The rears are +41. I made a cardboard template that matched the profile of the sidewall and the flange of the wheel. The closet item was the brake line. The template had to be trimmed to 0.9" to clear. The +41 offset on the 11.5" puts near all of the extra 0.5" towards the inside. A +40 or +39 would have bought a little more clearance, but I didn't want the wheels to "poke" out. Last edited by Black Red '90; 05-25-2021 at 06:57 PM.