ZR-1 Net Registry Forums - View Single Post - Converting a L98 tensioner to replace a 10067479

2poor4aZR1 · 04-11-2023

IMG_20230407_162849.jpg IMG_20230407_162845.jpg

A bunch of shaping, filing, and sanding, and the limit stops are in place thanks to a template and some geometry,

Next, I built up the stop on the base of the tensioner in the same manor as the limit stops above:

IMG_20230407_144521.jpg IMG_20230407_151329.jpg

Last modification to the pivot arm is to grind off the original stops since they are not needed. This is purely cosmetic, but I chose to do it anyway:

IMG_20230407_164044.jpg

04-11-2023	#2
2poor4aZR1 Join Date: Mar 2023 Location: Texas Posts: 34	Re: Converting a L98 tensioner to replace a 10067479 IMG_20230407_162849.jpg IMG_20230407_162845.jpg A bunch of shaping, filing, and sanding, and the limit stops are in place thanks to a template and some geometry, Next, I built up the stop on the base of the tensioner in the same manor as the limit stops above: IMG_20230407_144521.jpg IMG_20230407_151329.jpg Last modification to the pivot arm is to grind off the original stops since they are not needed. This is purely cosmetic, but I chose to do it anyway: IMG_20230407_164044.jpg Last edited by 2poor4aZR1; 04-12-2023 at 11:17 PM.