[BlackZR1]

Originally Posted by hardhattg

I know this has been discussed have read all the threads just checking is any new tricks or advice to getting this serpentine belt on . Don?t want to change pulleys or belt size if can help it 2k mile 1990 . Tried installing a new replacement belt for many hours then gave up and tried putting old belt back on and can?t even get that one back on and I know that one fits . The tensioner and a completely retracted and trying to get over the back of water pump pulley last but just can?t get any leverage to pull it on it?s so tight ?

Can anyone offer any advice ?

Thanks

If the old belt won't go back on double check the routing. There should be a decal on the fan shroud with a diagram. Also it is a little tricky making sure the belt is engaged on the lower pulley properly so that the ribs in the belt are engaged into the ribs on the lower pulley. It does help to have 3 hands but if you are holding the tensioner in a retracted position it should not be a battle to get the belt on