ZR-1 Net Registry Forums - View Single Post

tccrab · 09-26-2010

Using dremmel grind hole in the side of the old relay to run the wires out:

I put a small piece of tygon tubing to protect the wires from chaffing on the sides of the hole in the relay cover:

Crimped and soldered spade lugs for the new relay & quick mount base. I also back filled the tygon tubing with black silicone sealant to protect the wires and seal up the relay:

Finished product:

Installed into the ABS pump:

Used Tech One to clear the codes and no more problems.

TomC
'Crabs

09-26-2010	#18
tccrab Join Date: Oct 2004 Location: Folsom CA Posts: 1,649	Re: Need ABS Solenoid Relay Using dremmel grind hole in the side of the old relay to run the wires out: I put a small piece of tygon tubing to protect the wires from chaffing on the sides of the hole in the relay cover: Crimped and soldered spade lugs for the new relay & quick mount base. I also back filled the tygon tubing with black silicone sealant to protect the wires and seal up the relay: Finished product: Installed into the ABS pump: Used Tech One to clear the codes and no more problems. TomC 'Crabs __________________ TomC '90ZR1 #792 Honorary Pirate [B]If it ain't FUN, you're doing something terribly WRONG. [/B]