Re: EZ Pass transponder
I always mounted my Valentine 1 in the "garage door opener" cutout and simply put the I-Pass (Illinois) unit in front of it and held tight by pushing the V1 up against it. Marc had run a hard wired lead up through the grille on top of the dash from the fuse box so it was quite convenient. Worked fine for many years. You can see it (somewhat dimly) in the picture below. Illinois later change the I-Pass shape but it still worked fine there.--Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z"
1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts
--Sold but still running strong
1993 Quasar Blue #161 "HIL KING"
--Sold but still running strong, now with more than 120,000 miles
1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd
--Sold a long time ago
ZR-1 Net Registry Founding Member #95
NCM Lifetime Member
Favorite Quote--Attributed to Mickey Thompson:
"Too Much Horsepower is Almost Enough"
Last edited by WARP TEN; 12-12-2017 at 10:21 AM.
|