ZR-1 Net Registry Forums - View Single Post

LGAFF · 02-01-2015

Plan will be to weld 1/2 X 1 inch flat stock or 1/2 X 1/2 square stock to the edge....then build a top with 1/2 inch stock, will need to check for clearance on the outer edge first

02-01-2015	#47
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,191	Re: Frankenplenum Plan will be to weld 1/2 X 1 inch flat stock or 1/2 X 1/2 square stock to the edge....then build a top with 1/2 inch stock, will need to check for clearance on the outer edge first __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 Last edited by LGAFF; 02-01-2015 at 08:03 PM.