ZR-1 Net Registry Forums - View Single Post

XfireZ51 · 09-24-2014

[QUOTE=5ABI VT;212888]Wiping wiping wiping .. Before I get any further ... I noticed something .. When pulling the bell housing I remember some bolts being hard to reach .. After I pulled the coil packs there are easily accessible bolts on the bell housing from the top . Maybe it's a good thing I decided to do both at the same time !

Yes that's called the rule of "While you are there you may as well...".
Basically the rule states that you take advantage of doing one or more things since they are already adjacent to the initial thing you started out to do in the first place.

09-24-2014	#82
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,666	Re: Pulling the plenum / IH Some pics !! [QUOTE=5ABI VT;212888]Wiping wiping wiping .. Before I get any further ... I noticed something .. When pulling the bell housing I remember some bolts being hard to reach .. After I pulled the coil packs there are easily accessible bolts on the bell housing from the top . Maybe it's a good thing I decided to do both at the same time ! Yes that's called the rule of "While you are there you may as well...". Basically the rule states that you take advantage of doing one or more things since they are already adjacent to the initial thing you started out to do in the first place. __________________ [SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX