ZR-1 Net Registry Forums - View Single Post - Jumper to avoid being stranded with a failed Primary Fuel Pump

WVZR-1 · 05-28-2015

I would think you would want sufficient length between connectors to maybe pass the four wires through a "heat-shrink" tube when constructing and then shrinking to keep the bundle secure. Wouldn't need to be long but I believe needs to have some length to avoid struggling when connecting.

I'd think Jim has first-hand knowledge of a practical length and I'd certainly inquire/enlist his help before constructing.

Cliff - did you check the "clocking" of the black and green/white on yours?

05-28-2015	#29
WVZR-1 Join Date: Oct 2004 Posts: 1,889	Re: Jumper to avoid being stranded with a failed Primary Fuel Pump I would think you would want sufficient length between connectors to maybe pass the four wires through a "heat-shrink" tube when constructing and then shrinking to keep the bundle secure. Wouldn't need to be long but I believe needs to have some length to avoid struggling when connecting. I'd think Jim has first-hand knowledge of a practical length and I'd certainly inquire/enlist his help before constructing. Cliff - did you check the "clocking" of the black and green/white on yours?