ZR-1 Net Registry Forums - View Single Post

KJL · 05-10-2015

Yes Mike Ebert did the work. Very nice job. All I did was port match the heads to the injector housings and clean up some gasket issues. Didn't pick up much HP, maybe a few. What I did was not worth the effort. When I get around to replacing gaskets, servicing injectors and Fuel line o-rings, I will see if I can track down Mike to do the same thing to the 92 intake and housings.

05-10-2015	#9
KJL Join Date: Mar 2013 Location: Roswell, GA Posts: 232	Re: Put The 92 on the Dyno Last Night Yes Mike Ebert did the work. Very nice job. All I did was port match the heads to the injector housings and clean up some gasket issues. Didn't pick up much HP, maybe a few. What I did was not worth the effort. When I get around to replacing gaskets, servicing injectors and Fuel line o-rings, I will see if I can track down Mike to do the same thing to the 92 intake and housings. __________________ 1995 ZR1 #159 Ported,Corsa,4.10 Rear, Dual Disc RAM Clutch, Alum Flywheel, Haibeck Chip, ZFDoc Plates, Relocated Battery 400 rwhp 1992 ZR1 #280 Ported, Locked Secondary's, Flowmaster Exhaust, Haibeck Chip, 375rwhp 1996 Collectors LT4 (Stock) 1972 Convertible 434 Small Block 572 rwhp Last edited by KJL; 05-10-2015 at 12:53 PM.