Thanks everyone for your help
. I finally got around to trying some new things so here is my updates.
First, I cannot find the purple wire running to the starter so does anyone know where I could find it? I looked over the schematic posted and measured the voltage after the clutch switch (I believe it was a grey/black wire) which was 11.3V. The weird part is if you depress the brake then the voltage goes away. The schematic shows the clutch switch as stand alone but my clutch switch appears to be hooked in series with the brake switch. The starter solenoid appears to be clicking and it is obviously passing voltage to the clutch switch so what gives? I would like to check the wire on the outside of the firewall going to the starter before I start tearing apart for the starter solenoid.