Re: TB removal and then some!!!
Quote:
Originally Posted by Roadster
I haven't ran the LT5 in at least the last 5-6 years....that's what happens when you have 3 projects apart all at the same time....
So a few questions asked and advice needed...
1...we replaced the injectors around 2015-2016 at Jim's garage....should they be removed to be cleaned and flow tested???
2...gas tank is full[emoji618]️ and has Sta-bil in there....but I realize that won't last forever....so a drain and refill of fresh gas in order...I'm assuming???
3....since the plenum is pulled....was thinking about doing a secondary delete.....thoughts....
I know alot of other things need to be done...such as putting everything back together....lol....as I have a list of things to do....but any advice or suggestions is appreciated.....thx...[emoji16][emoji16]
Sent from my SM-G981U using ZR-1 Net Registry mobile app |
If you haven't already, I suggest you look at this article by Marc Haibeck called "Gently waking a sleeping LT5". It is on his website. Maybe that can offer a few ideas:
https://www.zr1specialist.com/HAT%20...ping%20LT5.pdf
Also this one, "The Great Awakening": https://www.zr1specialist.com/HAT%20...0Awakening.pdf
He also has a number of presentations and articles on the secondaries that you might find helpful. Good Luck! --Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z"
1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts
--Sold but still running strong
1993 Quasar Blue #161 "HIL KING"
--Sold but still running strong, now with more than 120,000 miles
1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd
--Sold a long time ago
ZR-1 Net Registry Founding Member #95
NCM Lifetime Member
Favorite Quote--Attributed to Mickey Thompson:
"Too Much Horsepower is Almost Enough"
Last edited by WARP TEN; 01-31-2024 at 10:45 AM.
|