Selling 1991 Corvette ZR-1. Car has 27,800 miles. Great car and fun to drive. The car idles and runs like a stock ZR-1. It has a 368 cubic inch motor with polished cam covers and intake plenum all aluminum parts have been polished to enhance the appeal when you open the hood. This car has many upgrades, ported and port matched heads/injector housings/plenum, 63mm dual-throttle body, new injectors, Jeal headers, three-inch B&B stainless exhaust, Hurst Billet Plus shifter. Coil over shocks on the front, ZFdoc blueprinted 6 speed transmission. Spec pressure plate, Kevlar Disk, balanced drive shaft, new spicer u-joints everywhere. New 3:72 gears and new seals in the differential. C5 Brakes and rotors on the front, stainless lines, and polyurethane bushings all around... the chassis is stock.
It made 442 RWHP on pump gas! (442hp with 18% loss = 545 crank hp) WITH STOCK CAMS!
The Floor and rear compartment covered with a sound deadening/thermal barrier material. '96 Collector Edition seats recovered by Mark's Custom Upholstery in Converse, Texas. The black seats with special red stitching and custom red ZR-1 logo on the headrest really sets off the interior.
The original wheels were replaced with polished late-model five-spoke ZR-1 wheels. I have more pictures if needed. $25,000
This car has so many upgrades, if you're interested call me and I can tell you the rest. 901-573-3406
The only reason I'm selling is I've bought a 1967 Corvette Coupe I've been wanting for years.
Thanks,
Randy