Quote:
Originally Posted by zig
... snip ...
If anyone has an ideas regarding this secondary solenoid , throw them at me.
...snip....
|
It's been a very long time (12-14 yrs) since I reworked the secondary vacuum lines and stuff in the V but seems to me I
stretched it a bit, changed the
check valve and cleaned out the vacuum reservoir while I was in there. And I turned the actuators around (they looked crooked) and bent the L bracket on them to pull straight. (used mity vac tool to test)
I haven't had to work on the secondary since (except the pump)
Out of curiosity I just went out and turned the key on. The pump rand 6-7 seconds then nothing. (waited 2min to see if it'd leak down).