ZR-1 Net Registry Forums - View Single Post

Schrade · 06-28-2014

edited for completion...

I used felt adhesive for the new felt $5 at Lowe's:

I painted the pad with a mini-roller, + water-based Acrylic Latex paint, to stop pad dust from coming through the new felt, and to give some re-enforcement to the pad. A rattle can with clear Poly, or Black paint would probably do the same.

Place the new felt onto the pad. Flip back the lower half, to hold placement, and then apply adhesive with a putty knife:

Flip down the lower half, then glue the upper half:

(DO NOT PRESS DOWN TOO HARD - THE ADHESIVE WILL COME THROUGH THE FELT. You could see that in the 'Skully' '94 top... )

06-28-2014	#2
Schrade Join Date: Dec 2012 Location: NC Posts: 1,786	Re: Sagging headliner ... (snappics) edited for completion... I used felt adhesive for the new felt $5 at Lowe's: I painted the pad with a mini-roller, + water-based Acrylic Latex paint, to stop pad dust from coming through the new felt, and to give some re-enforcement to the pad. A rattle can with clear Poly, or Black paint would probably do the same. Place the new felt onto the pad. Flip back the lower half, to hold placement, and then apply adhesive with a putty knife: Flip down the lower half, then glue the upper half: (DO NOT PRESS DOWN TOO HARD - THE ADHESIVE WILL COME THROUGH THE FELT. You could see that in the 'Skully' '94 top... ) __________________ I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG] Last edited by Schrade; 08-01-2014 at 04:00 PM.