[nelson007]

Thanks Paul ,
I checked the merchandise page and did not see the ZR1 liner. My liner is only pulled away from the foam about 3" along the side. How were you able to tuck in the liner with the foam still in place? I tried using a plastic spreader to push it in, but could not get it tight enough. That' why I was going to remove the foam.
Thanks Again,
Nelson


QUOTE=Paul Workman;206463]Hi Nelson!

I bought the "kit" from Midamerica to re upholster mine. However, I believe that Robert DeMarco has some headliners with the ZR-1 script on them which you might prefer (maybe available too at the Registry Store, come to think of it!).

My foam was in good shape so I didn't have to remove/replace it.

Hint: There seems to be a "window" for contact type glues where timing is "just right" to press the two pieces together. Too early is almost as bad as too late, I find. And, many times, especially when working on larger areas like carpet (or the headliner too, in my case), the window is missed and pressing the surfaces together after that and the result is definitely left wanting. Furthermore, removing the pieces to start over can result in a poor to disastrous result.

The solution is simple enough - recommended by the auto body supply store owner I know: just spray another coat to one of the surfaces (the foam) and w/o waiting for it to get tacky, immediately press the pieces together. Not only with the bond be good, but you might be able to work with the pieces - adjust the fit a little whereas w/o the third coat adjustment is nearly impossible.

(The 3M Weather Stripping Adhesive is one example of a glue that sets up so fast that one can easily miss the window for best results. But, using this hint made all the difference in the world; not only on the headliner, but reapplying the emblems after the car was painted.)

Good luck, buddy!

PS: Far as the headliner coming off during the "Tail of the Dragon" run, it's ALL Robert or GUNNY'S fault. Shoulda known those switchbacks would cause stuff to come loose and they shoulda warned us! LOL![/QUOTE]