Re: Leaking Coolant Overflow Cap
Quote:
Originally Posted by emmvette
Its not over-flowing; it only leaked / splashed out during an auto cross / road race event from spirited driving. It is coming out from the overflow cap, which suggests I just need to fabricate a simple gasket for the lid, or replace the lid.
|
Ah! Glad to hear that. Mine was over-flowing, due to the pressure cap (on the black surge tank) leaking. A new cap fixed that problem of coolant not being drawn back into the system as the block cooled.
My 90 doesn't have a gasket (on the over-flow cap), but I fill the over flow tank to the "COLD" mark (on the attached dipstick) when the motor is cold (with the pressure reservoir filled completely). The level when hot never sees the coolant go over the HOT level in the tank, w/o something being amiss.
Ami's 91 Z apparently has a "selfee" paper gasket, cut from gasket paper, but is otherwise identical.
__________________
Good carz, good food, good friendz = the best of timez!
90 #1202
"FBI" top end ported & relieved
Cam timing by "Pete the Greek"
Sans secondaries
Chip & dyno tuning by Haibeck Automotive
SW headers, X-pipe, MF muffs
Former Secretary, ZR-1 Net Registry
Last edited by Paul Workman; 07-17-2014 at 08:40 AM.
Reason: clarifications
|