Quote:
Originally Posted by Paul Workman
I concur with Dominic. The Bosch (in particular) would become intermittent at times - causing me "a little" angst!
But, the REAL angst was accessing the sensors to remove and reinstall them!
The "fix' was plugging the top mount bungs and installing new ones facing laterally toward the frame rails. What a good idea that turned out to be! (I placed them at about 80-85ยบ from vertical to my SW header collectors. I've NO problems with them bottoming out, and heaven knows I've tested them!!)
O2 (weld in) Bungs: Summit Racing: #SLE 30115
|
I really didn't have an issue accessing the sensors, using a slotted 3/8ths offset wrench.
Per XfireZ51 and your advice, I went ahead and ordered the delco sensors from rock auto, since I only had one useful bosch sensor from my amazon order.
-Stephen