Quote:
Originally Posted by Billy Mild
My vacuum pump runs for literally 1 second then shuts off. The system appears to be pretty tight as far as that goes. It doesn't seem to leak from that aspect. Everything was ZIP-Tied and and any pieces that didn't seal well with a vacuum pump were replaced.
I have leaking fuel from under my plenum. It didn't do this the night I got the work complete, and it didn't leak yesterday. It must have done this overnight. So I guess the plenum is coming back off?
|
BTW, the injector O-rings, if not seated properly, can be a cause of a vacuum leak. Were they removed earlier? Good idea to use some sealer where the injector O ring seats in the housing.