[Scrrem]

Originally Posted by QB93Z

Next I used Adams Swirl and Haze Remover with a micro-fiber cloth. I put a few drops of the Swirl and Haze Remover on a cloth and with one finger I rubbed the painted portions of the engine working on a small area at a time. When the cloth became black from removing grime, I "rinsed" the area with Simple Green and polished with a clean micro-fiber cloth. And repeat as necessary. And repeat! And repeat!!!!!!

Interesting Jim, I'll have to try this. My plenum is stained and needs freshing up badly. I'll let you know.
Rich