View Single Post
Old 08-25-2013   #3
scottfab
 
scottfab's Avatar
 
Join Date: Jan 2009
Location: Portland Oregon metro area (Washington side)
Posts: 3,207
Default Re: How to vacuum test secondary throttle actuator system

Quote:
Originally Posted by KJL View Post
I have the plenum removed and thought it would be a good time to check the secondary vacuum actuators. I have a hand vacuum pump I use to check things out on my 72. With plenum removed, where should pump be connected and what lines should be plugged? There are lines to a vacuum pump, sensor (mounted under plenum) and a line that goes to the plenum and connects to the solenoid (not sure what this is for other than solenoid activation?).

Thanks!!
I'd go straight to the hose on each actuator. Test one at a time for smooth non sticking action and no leak down. If you have problems here there's no real advantage to moving to other tests.
__________________
Scott


Vett owner since 1979._It's about the car and the people

Last edited by scottfab; 08-26-2013 at 12:02 AM.
scottfab is offline   Reply With Quote