[Hib Halverson]

1) Replace the battery. Clean cable ends if necessary
2) Inspect the fuel tank. Clean/replace as necessary
3) Replace fuel pumps
4) Replace fuel filter
5) Replace injectors
6) Pull the fuel rails, flush them and replace the o-rings
7) Inspect engine wiring and connections. Repair as necessary
8) Inspect coolant hoses. Repair as necessary.
9) Change the coolant.
10) Replace the coolant fill cap
11) Replace the oil hoses
12) Change oil and filter
13) Inspect power steering hoses. Replace as necessary
13) Change power steering fluid.
14) Pull the ign fuses.
15) Crank the engine until oil pressure is up.
16) Replace the ign fuse, start engine and run until oil temp. is nominal
17) Diagnose any fault codes and repair as necessary
18) Remove the wheels
19) Replace brake hoses
20) Bleed the brakes
21) Replace the tires and reinstall the wheels.
22) Lube ball joints
23) Change the trans and axle lubes
24) Road test