ZR-1 Net Registry Forums - View Single Post - Driveshaft removal for speedo gear swap. C-Beam out or not?

phrogs · 4 Weeks Ago

I put transmission in neutral then pop rear u joint out of the rear, slide yoke fwd to make room and turning the driveshaft so the ujoint end clears the rear end to the left and wiggle it out.

Sometimes I will loosen to parking brake cable frame mounts to get the cable out of the way.

I just did this I had a rear main leaking and swapped my transmission.

I should have made a video.

4 Weeks Ago	#10
phrogs Join Date: Jul 2004 Location: Kalamazoo MI Posts: 1,741	Re: Driveshaft removal for speedo gear swap. C-Beam out or not? I put transmission in neutral then pop rear u joint out of the rear, slide yoke fwd to make room and turning the driveshaft so the ujoint end clears the rear end to the left and wiggle it out. Sometimes I will loosen to parking brake cable frame mounts to get the cable out of the way. I just did this I had a rear main leaking and swapped my transmission. I should have made a video. __________________ JOHNNY P Currently own 90 ZR-1 #845 DRM 500 engine package 90 #226 Might be a parts car not sure yet Last edited by phrogs; 4 Weeks Ago at 11:53 AM.