View Single Post
Old 02-27-2014   #9
A26B
 
A26B's Avatar
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,373
Default Re: Radiator Hose Clamp Markings

Quote:
Originally Posted by efnfast View Post
The ones I could see without mirrors or inspection camera's on my 90 were all stamped with an "S". The clamp on the bottom of the t tube had a small hole where the letter would have been stamped. Most of the clamps up high, in the line of sight were black, the out of site clamps were galvanized colored. -Steve
Just to be sure of the data I'm compiling, is the following accurate? Please cut, paste & edit as needed.
Thanks again.

1990, Coolant Outlet to X-over Pipe Hose, "S"
1990, X-over Pipe to Rad Inlet Hose, "S"
1990, X-over Pipe to Bypass Hose, Unknown
1990, Rad Outlet to T-Stat Hsng Hose, None visible, hole in tang
1990, T-Stat Hsng to Water Pump Hose, Unknown
__________________
Jerry Downey
JERRYS LT5 GASKETS & PARTS
http://www.jerrysgaskets.com
1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc.
2016 Black-Red, 3LT-Z51 Auto 8-speed.
A26B is offline   Reply With Quote