ZR-1 Net Registry Forums - View Single Post

WVZR-1 · 12-12-2017

Some potential after-market other than the NAPA selection BUT only for the later 10137658 which is also the NAPA interchange.

WELLS - SU1101

SMP - PC110

AIRTEX - 5S1254

AUTOPART INTERNATIONAL - 1802-302169 (couldn't confirm with an image)

When the GM 10137658 was used to replace the 10096172 there were GM notes that mentioned a different shield GM 10199080 likely required.

10096172 seems to have been used '90 & '91 with the 10137658 potentially in later '92+ builds.

If your '90 is apart it might be interesting to compare the shield differences with snapshots.

12-12-2017	#5
WVZR-1 Join Date: Oct 2004 Posts: 1,889	Re: WANTED: Cam position sensor for LT5 Some potential after-market other than the NAPA selection BUT only for the later 10137658 which is also the NAPA interchange. WELLS - SU1101 SMP - PC110 AIRTEX - 5S1254 AUTOPART INTERNATIONAL - 1802-302169 (couldn't confirm with an image) When the GM 10137658 was used to replace the 10096172 there were GM notes that mentioned a different shield GM 10199080 likely required. 10096172 seems to have been used '90 & '91 with the 10137658 potentially in later '92+ builds. If your '90 is apart it might be interesting to compare the shield differences with snapshots.