Re: Pressurizing oil procedure ?
what I do on my 1993 ZR1 is remove the fuel pumps fuses ( # 14 and # 15 )
Crank the engine about 3 times ..only cranking for 3 seconds each time ..as to not overheat the starter ....... then I put the fuses in and start the car.
works every time and no chain tension-er noise either.
Now..this might not be right ....and others may not do it this way..and may have another way
but it has worked for me for years
Last edited by bob@tradeshowconsulting.c; 07-30-2023 at 08:05 AM.
|