Re: engine wear
Dynomite aka Mr. Solutions: Thank you for the referral!! I will see if I can find the LT5 Oil Level Sensors!!
90ZR1#1221: Here's a link list for the items you might want to obtain. I don't think there is any need to buy all new bolts, only the ones you need.
Front Pan Bolts, 6mm
http://jerrysgaskets.com/store2/root...roducts_id=240
Side & Rear Pan Bolts
http://jerrysgaskets.com/store2/root...roducts_id=304
Pan Studs
http://jerrysgaskets.com/store2/root...roducts_id=303
Loctite 243 for Pan Bolts (Exterior) & Pan Baffle Bolts (interior)
http://jerrysgaskets.com/store2/root...roducts_id=591
Pan Gasket with Seal
http://jerrysgaskets.com/store2/root...products_id=16
Cleaner for gasket surfaces, tapped bolt holes, bolts and general purpose cleaner.
http://www.autozone.com/autozone/acc...er=119712_0_0_
Oil Pan Gasket Installation Guide
http://jerrysgaskets.com/store2/root...roducts_id=732
__________________
Jerry Downey
JERRYS LT5 GASKETS & PARTS
http://www.jerrysgaskets.com
1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc.
2016 Black-Red, 3LT-Z51 Auto 8-speed.
|