ZR-1 Net Registry Forums - View Single Post

secondchance · 10-06-2020

Keep an eye on voltage gauge as you turn the key to ignition. Does the needle dip? If yes, I would suspect corroded solenoid contact/plunger. If not, it might be VATS or clutch safety switch issue. Try starting again when the motor has cooled over night. If it does, again corroded solenoid would be suspect.

10-06-2020	#2
secondchance Join Date: Aug 2006 Location: McLean, VA Posts: 3,704	Re: Stuck out with a no start. Keep an eye on voltage gauge as you turn the key to ignition. Does the needle dip? If yes, I would suspect corroded solenoid contact/plunger. If not, it might be VATS or clutch safety switch issue. Try starting again when the motor has cooled over night. If it does, again corroded solenoid would be suspect.