[aafc]

I work for VP racing fuels at Orlando Speed World. So I took my Zr-1 to the
track to make a few runs while i sold racing fuel.
I have rpl the fx shocks with qa1's removed controller so no codes come up.
Adjust fronts to 0 clicks and rears to 4 clicks 26 lbs in rear tires (M/T).
I also had the convertor rebuilt . I now leave at 2200 to 2400 rpm .
The runs are as follows:
#1. 60 ft 1.742
1/8 7.636 @ 94.99 mph
1/4 11.902 @ 115.10 mph
hum 78% temp 85 deg.
AT 11:20 a.m.

#2. 60 ft 1.707
1/8 7.604 @ 92.96 mph
1/4 11.858 @ 114.46 mph
hum 70% temp 88 deg

last pass
60 ft 1.672
1/8 7.558 @ 92.99
1/4 11.825 @ 114.91
hum 62% temp 89 deg

I had a good day did not break anything and sold fuel to the other
racers. I wonder if my times are close to the FBI groups this Sunday.
Thanks again Pete for the help with my auto install on my ZR-1. (2004)
JOHN
1990 # 2546 white/black
one of a few auto (4l80E ) eq. Zr-1's