|
08-07-2023
|
#1 |
|
Join Date: Sep 2018
Location: Florida
Posts: 297
|
Anyone using urethane motor mounts?
Curious to see if anyone is using the following for motor mount replacement.
https://www.corvettecentral.com/c4-8...luminum-304930 Didn?t see too much on this for discussion outside of an old thread on solid mounts, which I do not want. |
|
|
|
08-08-2023
|
#2 |
|
Guest
Posts: n/a
|
Re: Anyone using urethane motor mounts?
Wish
Sent from my iPhone using Tapatalk |
|
|
|
08-09-2023
|
#3 |
 
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,045
|
Re: Anyone using urethane motor mounts?
You might give Marc Haibeck a call to see what he is recommending for motor mounts. I am sure he and Bob install a fair number. --Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough" |
|
|
|
|
08-20-2023
|
#4 |
 
Join Date: Apr 2017
Location: Wayne Illinois
Posts: 396
|
Re: Anyone using urethane motor mounts?
I bought & installed a set of Polyurethane motor mounts from another brand. I hated them!
They were stiff and made every part of the interior rattle & buzz with vibrations. Itwas terrible. I had stock style mounts installed & everything is back to being good now.
__________________
 91-#1935 Black/black & gray, Haibeck 500 Cams by Pete |
|
|
|
|
08-21-2023
|
#5 | |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,153
|
Re: Anyone using urethane motor mounts?
Quote:
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
08-22-2023
|
#6 | |
Join Date: May 2010
Location: Japan
Posts: 3,556
|
Re: Anyone using urethane motor mounts?
Quote:
I would only consider it for a race car. Thanks for sharing as that is what I imagined they would be like. Sent from my iPhone using ZR-1 Net Registry
__________________
Craig "ZR-1 NO KA 'OI" "ZR-1 ICHIBAN" 1995 #228 Black/Black with Dunn Heads ZR-1 owner since September 2003 ZR-1 Net Registry Founding Member #0074 NCM Lifetime Member #2048 
|
|
|
|
|
|
08-25-2023
|
#7 |
Join Date: Jan 2006
Location: Decatur, AL
Posts: 1,105
|
Re: Anyone using urethane motor mounts?
I am running urethane mounts on mine. I was hesitant because of some of the stories I heard but wanted the durability next to the Worx headers. This is the truth, it rides as good or better than my other cars with oem mounts. There is zero harshness zero vibration. I would install them again in a minute.
__________________
Corvette95 Registry and Forum (*************) 1989 C4 Conv Wht/Gry Auto Hardtop Top Flight SOLD 1995 C4 Coupe Purple/Blk 6 Speed 1989 C4 Conv Wht/Red Auto SOLD 1996 C4 Conv Black/Tan Auto SOLD 1994 C4 Coupe Wht/Blk SOLD 1995 C4 ZR-1 White/Gry #278 Dual Dunn Head SOLD 1986 C4 Coupe Black/Red 4+3 SOLD 1990 C4 ZR-1 Red/Red #0454 |
|
|
|
|
08-25-2023
|
#8 |
|
Join Date: May 2010
Location: Japan
Posts: 3,556
|
Re: Anyone using urethane motor mounts?
__________________
Craig "ZR-1 NO KA 'OI" "ZR-1 ICHIBAN" 1995 #228 Black/Black with Dunn Heads ZR-1 owner since September 2003 ZR-1 Net Registry Founding Member #0074 NCM Lifetime Member #2048
|
|
|
|
|
08-25-2023
|
#9 | |
|
Join Date: May 2010
Location: Japan
Posts: 3,556
|
Re: Anyone using urethane motor mounts?
Quote:
__________________
Craig "ZR-1 NO KA 'OI" "ZR-1 ICHIBAN" 1995 #228 Black/Black with Dunn Heads ZR-1 owner since September 2003 ZR-1 Net Registry Founding Member #0074 NCM Lifetime Member #2048
|
|
|
|
|
|
08-25-2023
|
#10 | |
|
Join Date: Apr 2017
Location: Wayne Illinois
Posts: 396
|
Re: Anyone using urethane motor mounts?
Quote:
__________________
91-#1935 Black/black & gray, Haibeck 500 Cams by Pete |
|
|
|
|
 |
|
|
Linear Mode
