|
10-25-2017
|
#1 |
 Join Date: Sep 2013
Location: Greenvine, Texas
Posts: 29
|
Vacuum Pump Installation
Gents,
Discovered the vacuum pump in Mary Jane's '91 is laying loose in the right front corner under the headlight. Appears that it should be mounted using a bolt at one end and a tab at the other, but cannot determine the location within the reach of the attached vacuum line and wiring. Would appreciate any clues available as to how it mounts; a photo if possible. Cannot use my '91 as a go-by as its vacuum pump is long gone. The Helm Manual Electrical Section 8A-22-12 gives a vague written location, but does not provide a diagram. !#$%^ Regards, S. Lee Sikes, '91 Dark Red / Saddle (pumpless) Mary Jane Sikes, '91 Polo Green / Saddle (loose pump) |
|
|
|
10-27-2017
|
#2 |
|
Join Date: Sep 2013
Location: Greenvine, Texas
Posts: 29
|
Re: Vacuum Pump Installation
Problem solved.
|
|
|
|
|
10-27-2017
|
#3 |
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,137
|
Re: Vacuum Pump Installation
Glad you figured it out..
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - 3" Magnaflow Bullet cats - LT4 Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
 |
|
|
Linear Mode
