10-02-2011 | #1 |
Join Date: Aug 2008
Location: Houston 90 Red ZR-1
Posts: 2,320
|
Done and good to go.
The weather is finally starting to get cooler so it was time to get cracking so id be ready for the Texas BBQ. Got the new water pump on and the new Samco hoses with the 316 SS ABA clamps. And while I was at it fixed an oil leak that was coming from the ebbed plug on the drivers side cam cover. Kill two birds with one stone. But before I can drive it my insurance is up for renewal and my registration is way out. Hope you guys enjoy the pics and video.
http://s301.photobucket.com/albums/n...-11-56_972.mp4 Last edited by rhipsher; 10-02-2011 at 06:53 PM. |
10-03-2011 | #2 |
Join Date: Dec 2004
Location: Jacksonville, FL USA
Posts: 4,645
|
Re: Done and good to go.
Rick you do nice work! That car sounds & looks nice!
Tom
__________________
1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member |
10-03-2011 | #3 |
Join Date: Aug 2008
Location: Houston 90 Red ZR-1
Posts: 2,320
|
Re: Done and good to go.
Thanx. Its amazing how nasty a garage floor can getting after coolant and oil get all over the place. After scrubbing and sparying that out next comes the fun part. Putting all the tools away. Ive got two big rollaways and thats still not enough for all the tools I have cuz they are packed. I'm gonna have to probably just beak down and invest in a great big one.
Last edited by rhipsher; 10-03-2011 at 01:42 PM. |
10-05-2011 | #4 |
Join Date: Dec 2003
Location: McHenry, Il.
Posts: 6,607
|
Re: Done and good to go.
Good job and nice video -- enjoyed the tour!
Have fun at the SGC event take lots of pix for us to see.
__________________
http://i119.photobucket.com/albums/o...9mcw/SIG-2.jpg http://i119.photobucket.com/albums/o128/wb9mcw/vcm.gif "The Budget should be balanced, the Treasury should be refilled, public debt should be reduced, the arrogance of officialdom should be tempered and controlled, and the assistance to foreign lands should be curtailed, lest Rome will become bankrupt. People must again learn to work instead of living on public assistance." - Cicero, 55 BC " We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution." - Abraham Lincoln |
10-06-2011 | #5 |
Join Date: Jun 2010
Location: back in lone pine
Posts: 591
|
Re: Done and good to go.
rick what did you use tyo get the phelonic spacer to match the porting ???/looks nice by the way
|
10-06-2011 | #6 |
Join Date: Aug 2008
Location: Houston 90 Red ZR-1
Posts: 2,320
|
Re: Done and good to go.
I marked the spacers face 1 2 3 & 4. Then I bolted them to the IH housing and blended them and did the same thing on the plenum side. So there is a transitional blend that the spacers are actually part of. I can buy a whole roll of Felpro gasket stock any thickness I want for $3.50 and probably get 15 gaskets out of it. I even made the gasket that goes between the throttle body and air horn which worked great.
|
|
|